Jim Oko

Jim Oko

Project Executive, Food & Beverage

Jim has 23 years of experience in the design, analysis and improvement of operations, systems and facilities. His responsibilities include facility design, equipment design and procurement, project management, start-up and commissioning for projects in the food and beverage processing industries. This includes the development of process design, material balances, block flow diagrams and automated systems for related facilities. He has managed projects for Columbus Foods, Smithfield Foods, Purdue Farms, Sara Lee Foods, Starbucks, Pinnacle Foods, Cuisine Solutions, Maple Leaf Foods and others.

 

 

The latest from Jim Oko

Views: 1781

Inside the World’s Largest Sous Vide Processing Facility [PHOTOS]

“Sous vide” is French for “under vacuum” and has been around for decades in France. Since 1971, Cuisine Solutions — along with subsidiary CREA and Chief Scientist Dr. Bruno Goussault — has been perfecting the sous vide technology utilizing cooking time and temperature as the foundations of its development.

As the need for food safety and consistency has dramatically increased in recent decades, the company continued investing in more production capacity, new adjacent technologies and greater innovations — including a new plant in San Antonio, Texas.

Continue Reading “Inside the World’s Largest Sous Vide Processing Facility [PHOTOS]”
Views: 1961

Flexible Food Manufacturing: 5 ‘Blind Spots’ That Can Hurt Your Ability to Adapt to the Market

You could argue that flexibility in food manufacturing has never been more important: new generations of consumers are craving more variety, the internet is reshaping how food is packaged and purchased and a global pandemic just reminded us all of how crucial (and fragile) the supply chain can be.

With some speculating that history could (at least somewhat) repeat itself for another post-pandemic “Roaring Twenties,” how can food and beverage companies prepare for sustainable success in the decade ahead?

Continue Reading “Flexible Food Manufacturing: 5 ‘Blind Spots’ That Can Hurt Your Ability to Adapt to the Market”
Views: 1039

Keeping Cyclospora at Bay in Your Food Processing Plant

Earlier this year, the U.S. Food and Drug Administration (FDA) and the Centers for Disease Control and Prevention (CDC) linked contaminated salad kits to a multistate outbreak of Cyclospora that infected more than 700 people. In 2019, the culprit was contaminated fresh basil, triggering a recall by the exporting company.

But how do outbreaks like this happen? Knowing how to prevent Cyclospora from entering your food plant is critical for maintaining the safety of your products and the trust of your customers, especially during a time of heightened awareness surrounding sanitation and public health.

Continue Reading “Keeping Cyclospora at Bay in Your Food Processing Plant”
Views: 8118

Food Safety: Biofilm Formation and Removal

Biofilm can form just about anywhere in a food processing plant — even the cleanest looking surfaces can be a threat to food safety if an invisible layer of bacteria is present. Why does biofilm form and how can it be prevented? Knowing how to detect and eliminate biofilm is crucial to ensuring your food plant’s processing equipment is contaminant-free.

Continue Reading “Food Safety: Biofilm Formation and Removal”

Views: 3360

Ready-to-Eat Food Manufacturing: 5 Recommendations for Future Growth

The demand for healthy and convenient ready-to-eat (RTE) food is on the rise. Already the largest segment in the overall conventional and non-conventional food industry, the RTE food market is forecasted to grow at a 21.8-percent compound annual growth rate (CAGR) between 2018 and 2023.

Many consumers today want foods that are both convenient and healthy, foods that require little to no preparation and that are natural, organic, non-GMO and more. So how can RTE food manufacturers prepare their facilities for this growing demand? Let’s explore some important considerations as these companies look to the future.

Continue Reading “Ready-to-Eat Food Manufacturing: 5 Recommendations for Future Growth”

Views: 1049

X-ray and Metal Detection Technology: Get the Most from Your System

Major food recalls are a reminder of how critical detection technology is for a food facility — and lately, it seems we’re being reminded far too often. There are a lot of variables when it comes to x-ray and metal detection systems: What should you buy? How much protection is enough? How do you maximize performance? Let’s start by understanding the difference between x-ray and metal detection technology.

Continue Reading “X-ray and Metal Detection Technology: Get the Most from Your System”

Views: 4039

6 Food Safety Areas to Examine During Operational Facility Improvements

Many food plants operate 24 hours a day, seven days a week, in some capacity. Without proper planning, quality control, good manufacturing practices (GMP) and sanitation procedures, an around-the-clock operation is a high-risk candidate for food safety dangers. In this type of environment, how are essential retrofits and renovations accomplished without compromising daily operations, food safety and personnel safety?

Continue Reading “6 Food Safety Areas to Examine During Operational Facility Improvements”

Views: 2878

Can Compressed Air Systems be a Source of Contamination?

Did you know that compressed air systems can be a source of contamination in your food plant? Dangerous bacteria and pathogens can be difficult to spot in your facility—especially if they are airborne. It’s a common misperception that compressed air is considered as clean as the air from the outdoor environment that surrounds your facility—NOT true. Once in the compressor, the air outside of your facility (ambient air) mixes with other elements within your compressor (i.e., corrosion, worn seals). Whatever is not caught in your filtration system is then circulated throughout your plant.

Continue Reading “Can Compressed Air Systems be a Source of Contamination?”

Views: 1007

Food Processing Plant Down? 3 Solutions to Keep Operations Moving

Aside from producing high quality, safe products, what is one of the most important rules of food manufacturing? Do not short your customers. If a disaster puts your plant’s operations on pause, know your options for continuing production outside the walls of your facility. Co-packing, co-manufacturing and built-in redundancy are three solutions to keep your operations moving when your plant is down. Here are the key things to know about each.

Continue Reading “Food Processing Plant Down? 3 Solutions to Keep Operations Moving”

Views: 2233

New Trends in Sanitary Equipment Design are Improving Food Safety Standards

As food safety regulatory requirements become more stringent, equipment manufacturers are stepping up to the plate and increasing the role they play in the industry. The American Meat Institute’s (AMI) 10 sanitary design principles offer baseline standards for equipment design, yet many suppliers are going above and beyond these standards by offering improved surfaces, cleaning chemicals, and construction processes.

Continue Reading “New Trends in Sanitary Equipment Design are Improving Food Safety Standards”