6 Points, One Stone: How Low-Impact Development (LID) Can Help Achieve LEED Certification

Views: 82   No Comments  

by:

6 Points, One Stone: How Low-Impact Development (LID) Can Help Achieve LEED Certification

If you’re not familiar with low-impact development (LID), you may want to keep reading before building your next facility or warehouse. Thanks to recent changes in LEED requirements, we’re going to see an increase in projects utilizing LID in the near future.

What exactly is low-impact development? How can you make the most of LID and maximize it when applying for LEED certification? Let’s unpack what it means for your next project.

 

5 Ways to Reduce Water Use in Your Food Processing Plant

Views: 294   No Comments  

by:

5 Ways to Reduce Water Use in Your Food Processing Plant

Food and beverage manufacturing facilities are notorious for how much water they consume. While water is central to your plant’s operations, there may be ways you can operate more efficiently and be smarter about how your plant uses water.

Optimizing your water consumption is not only better for the planet, but it may save you in utility costs as well. Let’s look at five basic ways to reduce water consumption in a facility.

 

Understanding LEED v4’s Energy and Water Use Prerequisites and Credits

What you need to know about v4’s focus on energy efficiency, as well as new credits to consider pursuing for your project

Views: 420   No Comments  

by:

Understanding LEED v4’s Energy and Water Use Prerequisites and Credits

When it comes to green building, LEED v4 is the new standard. As of October 31, 2016, the United States Green Building Council (USGBC) will only accept new LEED registrations under LEED v4. Although the registration date was extended, the last day projects can submit for v3 certification — the sunset date — is still June 30, 2021.

The latest version of the LEED rating system features more rigorous standards, and while some of the credits and prerequisites are essentially the same as the 2009 version, there are some significant changes.

I outlined those changes in a previous post, but now let’s take a closer look at some of the new prerequisites and credits ushered in by LEED v4, specifically those involving energy use and environmental impact.

 

How to Achieve LEED Certification Without Sacrificing Process Performance

Views: 292   No Comments  

by:

How to Achieve LEED Certification Without Sacrificing Process Performance

So you want your building to be LEED certified, but what level should you pursue? Does a more energy-efficient facility mean completely revamping your processing? What about food safety?

LEED certification is a good thing, but it should not dictate every decision in a new-build or plant renovation. Checking credits off your LEED checklist shouldn’t come at the expense of performance and food safety.

Let’s look at some factors to designing a sustainable facility that go beyond the traditional aspects like electricity and water use. But first things first: where to begin?

 

How to Conserve Energy Across Every Aspect of Your Food Plant

Energy management from an engineering perspective

Views: 419   No Comments  

by:

How to Conserve Energy Across Every Aspect of Your Food Plant

 

Everyone wants to improve their energy management, and while there are countless best practices to improve energy efficiency in your processing, I look at it from an engineering perspective.

When designing a new facility or renovating an existing one, I consider the different ways the plant can prioritize energy management within each engineering group that brings the building to life. Let’s explore how you can design energy management into your next greenfield or renovation project.

 

6 Ways to Optimize Your Refrigeration Efficiency and Lower Energy Costs

Views: 2188   No Comments  

by:

Machine room

Did you know that up to 60 percent of a manufacturing facility’s total operating expenses comes from industrial refrigeration? It’s no surprise that refrigeration efficiency is a priority.

However, engineers often look to optimize individual components rather than taking a holistic approach, leading to wasted energy and operational inefficiencies. To avoid this fragmented approach, here are six steps to optimize the entire system and achieve the greatest energy efficiency:

 

6 Ways to Optimize Your Facility’s Energy Consumption

How to achieve water, electric and refrigeration efficiency that translates to long-term ROI

Views: 1615   No Comments  

by:

6 Ways to Optimize Your Facility’s Energy Consumption

Energy costs typically account for 30 percent of a facility’s operating budget. That means nearly a third of all the money you funnel into your plant goes straight to the utility bill.

We already know about the popularity of green building and sustainable practices, but is it possible to go too green? In short, yes. You don’t want to go so overboard with efficiencies that you’re overspending on unnecessary improvements.

 

Is LEED Certification More Achievable for Refrigerated Facilities in LEED v4?

What two credit interpretation rules mean for temperature-controlled plants

Views: 422   No Comments  

by:

Food processing and cold storage facilities have historically faced challenges when pursuing LEED certification. Refrigeration and process systems require a lot of energy, and there has never been a specific path or program for these types of facilities under the LEED umbrella. However, LEED v4 and its two specific credit interpretation rules are now making the path to certification more achievable.

 

What’s New in LEED v4: Big Picture Changes, Updates for Building Design and Construction

Views: 4867   No Comments  

by:

What’s new in LEED v4: Big picture changes, updates for Building Design and Construction

LEED v4 is here. This latest version of the LEED rating system is “bolder and more specialized for building projects worldwide,” and it features more rigorous standards. While some of the credits and prerequisites are essentially the same as the 2009 version, there are some significant changes you should know about if a new build or renovation is in your future.

 

Cold Storage Distribution: How Caspers is Utilizing Packaged Refrigeration Systems

Views: 1180   No Comments  

by:

Photo courtesy of Shecco Media

 

One of Florida’s oldest third-party logistics companies is introducing one of refrigeration’s newest innovations into its new cold storage facility: low-charge packaged refrigeration systems. With a focus on moving to eco-friendly refrigerants, McDonald’s franchisee Caspers Cold Storage and Distribution will be cooling its new warehouse with an ammonia/ CO2 and low-charge ammonia DX system. Because Stellar will be designing and building the new systems, Accelerate America editor Andrew Williams interviewed Stellar’s Brandon France to learn more about the project. Check out the feature article, “I’ll have CO2 and ammonia with that” in this week’s blog post to learn more about how the company is using low-charge refrigeration systems to lower costs, reduce installation time and utilize green refrigerants.