Jun 14, 2018
There’s never been a better time to invest in capital expenditures for your business. Recent tax reform has freed up cash and created more incentives for corporate entities to spend on new equipment and infrastructure.
Plus, the combination of mergers and acquisitions, advances in technology, and evolving consumer demand is spurring innovation. The speed-to-market food and beverage industry is only moving faster.
So it’s a great time to invest in your company’s growth, but what exactly is the best move? Considering the current industry climate, there are some forward-thinking options worth prioritizing.
Nov 2, 2017
How old is the control system at your facility? In most processing plants, the control system consists of field instruments that are wired to I/O cards which feed to a central PLC controller. Operators communicate with the PLC through a human machine interface (HMI) computer.
While the lifespan of an HMI computer is about the same as a typical desktop computer, the instruments, field wiring, I/O boards and PLC controllers last a lot longer — and the mentality of most operators is: “if it ain’t broke, don’t fix it.” Upgrading a control system is a costly investment, and, as a result, many facilities have field hardware that is decades old.
So, when is it worth upgrading your control system? And what options do you have?
Apr 27, 2017
Breweries and distilleries can be infamous for their “snake pits,” the areas of the facility where transfer hoses can criss-cross in a tangled mess.
Flow panels and hoses are widely used to route product and cleaning solutions through brewery and distillery piping systems, and they are a cost-effective initial investment. However, as a facility grows, so do the number of connections — and that can quickly get out of control.
Minimize the top food safety risks in your food and beverage facility
Sep 22, 2016
Ask any food manufacturer or processor if they are committed to high safety and quality standards and their answer will, of course, be yes. But even with the strictest standards, thousands of recalls are still issued each year in the U.S. In 2015, the FDA recalled 9,178 products, a 12-percent increase over the previous two years. If you weighed the amount of goods the USDA recalled last year alone, it would be as heavy as 52 Boeing 747 airliners. That’s a lot of product gone to waste.
Lessons from Food Engineering's 2015 Fabulous Food Plant winner
Dec 17, 2015
As today’s home-brewing coffee drinkers continue to seek convenient alternatives to coffee shops, the demand for delicious instant coffee has risen. However, it’s not always easy for processors to produce high-quality instant coffee, as there are many moving parts that must come together to put a tasty cup of joe on the kitchen table.
Dec 10, 2015
Total automation may be an ideal for most food processors, but it can be difficult to determine how to connect every system in a food plant—or if they should even be connected at all. To optimize ROI, it’s important to learn which areas of your food processing facility are best suited for automation. Below are five tips for improving your plant’s automation capabilities.
Oct 1, 2015
Today, our team is settling back into the office after exhibiting at PACK EXPO in Las Vegas. While packaging is fresh on our minds, let’s examine some fascinating packaging research released by The Association for Packaging and Processing Technologies (PMMI) earlier this week.
Tips for migrating your processor effectively, efficiently and affordably
Aug 27, 2015
Source: Rockwell Automation
Upgrading PLC-5 automation systems has been on the food and beverage industry’s radar for quite some time now. In fact, when I began working at Stellar 12 years ago, people were buzzing about Rockwell Automation moving the processor into retirement (“Silver Series” status). However, the PLC-5 1771 was such a widely popular system, Rockwell held back on pulling the trigger until recently. In August 2012, Rockwell revealed it would no longer support the PLC-5 processor anymore, including engineering replacement parts—big news, considering more than 80 percent of the marketplace owned these systems.
Applicable to all new or significantly rebuilt / remanufactured machinery
Jun 18, 2015
Automation has gained plenty of traction in the food and beverage processing industry thanks to benefits including cost savings, labor reduction and increased food safety. However, a slew of national and international guidelines and requirements has made owning automation equipment more complex than ever before—with risk assessments an especially gray area. The good news? Clearer risk assessment requirements have arrived from the International Organization for Standardization (ISO) and The American National Standards Institute (ANSI), offering more consistent expectations.
Jan 29, 2015
Food and beverage processors are increasingly turning towards robotics for the technology’s slew of benefits including reduced costs, upped throughput and increased food and worker safety. Earlier this month, I contributed to the Food Engineering article, “The rise of robotic automation,” discussing the functionality for robots in the food processing industry. While robotics does boast various benefits to food manufacturing, it’s important to follow some best practices during your own implementation.